1/10 Rc Ford Raptor/ F150 Truck Climbing Car/Rc Car

1. Dimensions: length 610MM width 220MM (body) height 215MM

Packing size: 750*330*295MM

2. Body weight: 4KG, remote control 0.32KG

Packing weight: 2.5 KG, total weight 6.8 KG

3. Main material: aluminum alloy, stainless steel, nylon, ABS, PC

4. Minimum ground clearance (position of bridge gear package) 26MM

5. The approach angle is 30 degrees, the passing angle is 15 degrees, and the departure angle is 15 degrees.

6. Power supply voltage: 12V, XT60 connector, it is recommended to use 3S lithium battery above 25C (battery needs to be purchased separately), size range: length, width and height within 155*57*30MM.

7. Maximum speed: 20KM/H (3S battery)

8. Remote control: Dumbo, the ESC adopts Hobbywing 1060 brushed ESC (Note: only the RTR version is equipped with remote control, ESC, steering gear, motor)

9. Sound module: need to be purchased and installed separately, not included as standard. 3T sound group is recommended,

10. Lighting system: need to purchase and install separately.

11. Main features, the chassis adopts front independent suspension rear hard axle structure, simulated hard shell, and the front and rear axles have differential locks.

12. Standard 1/16 planetary gearbox, can be upgraded with two-speed simulation gearbox (purchased separately), the reduction ratio is 1/17.4 for 1st gear and 1/4.75 for 2nd gear

Precautions:

In addition to the waterproofing of the ESC, the electronic equipment, receivers, and steering gears have been waterproofed before they can be properly waded. (Be careful to protect the motor)